Skip to content
used

Altronix Power Supply Charger with Eight Independent 12VDC or 24VDC Fail Safe and/or Fail Secure Outputs (AL600ACM220)

$380.00
SKU GS-U-3575A

Great condition, used, has accessories. 

  • Nominal 220VAC (range 198VAC - 256VAC) 50/60Hz rated @ 1.2A.
  • Power supply input options:
    • a) One (1) common power input for ACM8 and lock power (factory installed).
    • b) Two (2) isolated power inputs - One (1) to power the ACM8 and one (1) for lock accessory power, (external power supply is required). (Current is determined by the power supply connected, not to exceed a maximum of 10A total).
  • Eight (8) Access Control System trigger inputs.
  • Input options:
    • a) Eight (8) normally open (NO) inputs.
    • b) Eight (8) open collector inputs.
    • c) Any combination of the above.
  • 12VDC or 24VDC @ 6A supply current.
  • Eight (8) independently controlled outputs.
  • Output options:
    • a) Eight (8) Fail-Safe and/or Fail-Secure power outputs.
    • b) Eight (8) form “C” 5A rated relay outputs.
    • c) Any combination of the above.
  • Eight (8) auxiliary power outputs (unswitched).
  • Fuses are rated @ 3.5A.
  • Filtered and electronically regulated outputs (built-in power supply).
  • Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs.
  • Fire Alarm disconnect input options:
    • a) Normally open (NO) or normally closed (NC) dry contact input.
    • b) Polarity reversal input from FACP signaling circuit.
  • Alarm output relay indicates that FACP input is triggered (form “C” contact rated @ 1A 28VDC).
  • Short circuit and thermal overload protection.
  • AC fail supervision (form “C” contact).
  • Red LEDs indicate outputs are triggered (relays energized).
  • Green LED indicates FACP disconnect is triggered.
  • AC input and DC output LED indicators.
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Zero voltage drop when unit switches over to battery backup (AC failure condition).
  • Battery fail and battery presence supervision (form “C” contact).
  • Operating Temperature: 0ºC to 49ºC (32ºF to 120ºF).
  • Storage Temperature: - 20ºC to 70ºC ( - 4ºF to 158ºF).
  • Relative Humidity: 85% +/- 5%.
This is a used product, so there might be some wear and tear. All used products on our garage sale have been tested for functionality, but it may not look exactly like the product in the picture. Also note that we cannot guarantee this will come with all of its original accessories. For more information about our used products, check out our About Page.